Higaki Kaisen Model – Edo Tokyo Museum

The subject of my second Japan boat/model posts is a large Higaki Kaisen model (檜垣回線) located in the Edo Tokyo Museum. The ship is a type of sengokubune (千石船), or 1000 koku ship, a type of bezaisen (弁才船) or coastal transport.

The model is one of the largest models I’ve seen in Japan so far, very nicely detailed, and is particularly nice in that it is relatively easy to photograph as it is fairly well lit and you don’t have to shoot through glass or acrylic. I don’t know the exact scale, but I think it must be about 1/10-scale. I believe there is a larger model in Japan, but this one is readily accessible.

Continue reading

Speaking at the 2016 NRG Conference

Having been involved in Ship Modeling for more than 20 years, I’ve been a big admirer of the Nautical Research Guild and the work of its impressive membership. There have been so many great modelers involved in the Guild, I feel honored to be speaking together in a combined talk with boatbuilder Douglas Brooks at the opening talk of this year’s conference in San Diego. Douglas Brooks will be reprising his talk at last year’s conference on Japanese Wooden Boatbuilding, while I’ll be adding the element of modeling them.

IMG_1804

Douglas Brooks speaking at the 2015 NRG Conference in Mystic, CT.

Granted, my portion of the talk will the shorter segment. In the 15 minutes or so that I’ll have, I’ll only be able to scratch the surface of the subject, mostly talking about resources available to those who are interested in building a traditional Japanese boat. Pretty much, just enough to give folks a nudge toward attempting one.

The other part of my participation at the conference came as something of a surprise as I was told just last month that I was scheduled to do one of the round table sessions. These are 20-minute sessions that takes place simultaneously with 4 other sessions. People attend the session of their choice, and after 20 minutes, people then switch to another table. So, basically, I have a 20-minute demo, repeated a total of 4 times (with one 20-minute break).

Having no idea what I was expected to do, I’d considered a couple possibilities. The first thing that actually came to mind that I thought would work out, was to demo some of the details of paper modeling. Having completed only 1 paper model made it seem a bit odd, but I don’t think anyone else has done it, and I actually did have some interesting techniques to show.

But, talking with Kurt Van Dahm, the NRG Chairman, and others, it seemed that the idea was to give me more time to talk about modeling Japanese boats. So, I’ll be talking a mix of building Japanese kits and building from scratch. It seems a bit odd to me, as talking about kits seems a bit like a sales pitch. The only thing preventing it from being a complete conflict of interest, seeing as how I’ve done some work for Ages of Sail, is that Ages of Sail doesn’t currently carry any of the kits I’ll be talking about. And, my most highly recommended kit, the Tosa Wasen, will only be available direct from the manufacturer.

Bekabune model gifted to me from the Urayasu Museum.

Bekabune model given to me by the curator of the Urayasu Museum.

In any case, I’ll bring my in-progress Urayasu Bekabune models and a small supply of Japanese woods for people to sample themselves, giving them a chance to sand, cut and bend them. Show a couple in-progress kits, talk about how to read the Japanese language plans, etc. A 20-minute discussion should go by pretty quick, then repeat it three more times.

I really hope it won’t end up being the lamest NRG round table discussion in history, and people will find it interesting and useful. Wish me luck!

Japanese Boats Display in Japantown (v 4.0)

Last week, I spent an entire afternoon in San Francisco setting up my latest display of models of Japanese traditional boats in the Japan Center Mall in San Francisco. This is the largest display I’ve done, which is now up to 5 models. It’s probably about as large as it will get as I can’t imagine that I can possibly cram any more into my car. And, given that I live about an hour’s drive outside the city (or two hours in bad traffic), I’m not likely going to be making two trips to set it up. But, the size is actually pretty good now.

Since I’m doing some fundraising to go to Japan this Fall to do some more first-hand research on Japanese watercraft (don’t forget to check out my gofundme page), I’m taking the opportunity to really get some attention for this display. As with those people involved in the fine arts, I’ve made up an announcement card that I’m having printed up that I will be sending to various friends and people that  I think will be interested in it and possibly interested in helping me out (as well as those who have already done so). In addition, I’ve made a simple email announcement photo that I’ve been sending to people.

Announcement Emailer L plus

My email announcement card

If you’re already familiar with the last couple displays, you will see two new models added, a simple Japanese traditional boat shop display and the Tosa wasen model. Both are a nice, big 1/10 scale, so the details are better for a window display like this.

IMG_2398

The 1/10-scale Tosa Wasen is the newest boat model added to the display.

IMG_2382

This is my simple model of an Urayasu boat workshop, showing some of the aspects of traditional Japanese boatbuilding. Under construction is a Bekabune, a seaweed gathering boat that was once used on Tokyo Bay. The model still needs a few additions – a work in progress.

IMG_2403

The Hacchoro and the Urayasu boat workshop with their scale boatmen silhouettes. The Hacchoro is one of the boats I will be focussing my attention on while researching in Japan this Fall.

You may notice in that display window photos that I’ve created little silhouette boatmen to provide scale reference for each model. This was a last minute effort, though I’ve been thinking about it for months. I finally sat down and scoured the Internet and found photos of boatmen dressed in traditional outfits on someone’s blog photos. I took the best one and did some Photoshop work to turn him into a silhouette, which I scaled to the needed sizes, printed them, and mounted them on cardboard.

There are, of course, things to do differently next time, which I’ve already noted. The boat workshop display should probably be on some kind of a riser, like the other models, there is enough room to put up another large, hanging photo board, and there’s room for at least one more model, using the tall stand I introduced in this display. I suppose I could consider staggering them a little too.

That tall stand, by the way, is actually a better stand for me to use because it’s simple two boards hinged together. This makes them foldable and they take up a lot less space in my car. I’m seriously thinking about replacing the box pedestals on the other models with short folding stands, which would allow me to carry more stuff in my car. And, actually, if I build models without sails, I might be able to fit one or two more in that car. Of course, that means building more models and I’m pretty far behind on other projects as it is. We’ll see… Ω